6” Encapsulated Motor 50/60Hz Information – With Sand Fighter© As Standard
 |
Specifications
6" NEMA flange
Protection: IP 68
Starts per hour: 20
Installation: vertical/horizontal
Standard voltage: 380-415V / 50Hz, 460V / 60Hz Voltage tolerance: +6% / -10% (Standard: 415 + 6% = 440V,380 – 10% = 342V)
Motor protection: Select thermal overloads according to DIN 60947-4-1, trip class 10 or 10A, trip time < 10 s at 5 x I N
Insulation: Class F
Rated ambient temperature: 4-30kw up to 30°C; 37-45 kW up to 50°C
Cooling flow: min. 0,16 m/s
|
download file
|
Quality in the Well Franklin Electric 6"encapsulated Motors, manufactured to ISO 9001 standards, are the quality drive for your submersible pump. Water lubricated thrust and radial bearings offer you a maintenance free long life submersible motor operation. The Sand Fighter ® seal system is the option for sandy applications.
Product features:
Hermetically sealed stator, Anti track, self healing stator resin prevents motor burn out
Removable “Water Bloc“ lead connector
Cable material according to drinking water regulations (KTW approved)
Sand slinger and shaft seal for high performance in sand
High efficiency electrical design for low operation cost
All motors prefilled and 100% tested
Non contaminating, water-filled design
Standard
- 4,0 - 45 kW
- 380 – 415 V / 50 Hz
- 460 V / 60 Hz
- Thrust capacity: 15.000N; 27.500N
- Build-in PTC temperature sensor
- Retrofittable PT 100 temperature sensor
- Sand fighter® Motor with SiC-Mechanical Seal
Options
- Other voltages
- Motors complete in 316 SS
- PT 100 temperature sensor (sold separately)
- Motor lead in 4m length (KTW approved) Special lengths up to 50m
- Y? - start (pos. of cables 90°)
- Provision for filling solution exchange
- Built-in PTC temperature sensor
- Built-in SUBMONITOR Transmitter