10" Rewindable Motor - 50 / 60Hz

Fanklin 10 Applications
10" Rewindable motors are built for dependable operation in 10" diameter or larger water wells. Water lubricated thrust and radial bearings enable a maintenance free operation. A special diaphragm ensures pressure compensation inside the motor.

Product advantages:
  • Easy to assemble with double flange
  • Lead material in accordance with regulations for drinking water (KTW approved)
  • Sand slinger and SiC Mechanical seal for maximum sand protection
  • High efficiency electrical design for low operation cost
  • All motors prefilled and 100% tested Max. storage temperature -15°C - + 60°C
  • Design for retrofitable PT100 sensor
  • Non contaminating FES 93 filling
download file

Technical Specification

Standard Motor
  • 10" flange
  • Protection: IP 68
  • Starts per hour: max. 10
  • Installation position: vertical / horizontal (185 kW motors may not be installed horizontally)
  • Motor Lead in 6 m length (KTW approved)
  • Standard voltage: 380-415V/50Hz, 460V/60Hz Voltage tolerance: +6%/-10% (Standard: 415 + 6% = 440V, 380 – 10% = 342V)
  • Motor protection: Select thermal overloads according to EN 60947-4-1 , trip class 10 or 10A, trip time < 10 s at 5 x I N
  • Standard motor with PVC winding insulation for max. ambient temperature of 25ºC with a min. cooling flow: v = 0,5 m/s

Optional
  • Other voltages
  • Motors complete in 316 SS / 904L
  • PE2/PA winding insulation for max ambient temp. of 45°C at the same cooling conditions as standard
  • PT 100 temperature sensor (sold separately)
  • Lead in different length up to 50m


Saer Rotor Flush Franklin Electric Four Group E-Tech Boreline Well Pumps