MWR FOURGROUP STARTER/CONTROL PANELS > ELECROMECHANICAL SOFT STARTER (AVSSE1) |
![]() |
General Description Electromechanical control panel with Soft-Starter for 1 three-phase deep well, submersible or surface pump, with adjustable thermal protection according to the power of the pump (see models). Start the panel by turning the door interlocking general switch, a blue light will indicate that the panel is operating. The pump starts when a float switch or a pressure switch closes the contact. The acceleration and deceleration ramps can be set up independently. The thermal overload protection is manually restorable. |
Features
- Electromechanical control panel with Soft-Start starter;
- Input voltage 3~50/60 Hz 400V ±10%;
- Very low voltage input for pressure switch or float switch;
- Very low voltage input for external minimum level pressure switch or float switch;
- Transformer 400V/24V for auxiliary circuits;
- Selector for AUTO-OFF-MANUAL motor operation (MANUAL temporary on request);
- Blue light for power on;
- Green light for motor operating;
- Red light for motor protection alarm;
- Electronic internal Soft-Starter with the following functions:
- adjuster of max deliverable current;
- adjuster of motor acceleration time;
- adjuster of motor deceleration time;
- green led for correct operation;
- yellow led for end of ramp;
- red led for sequence of phases alarm;
- Circuit for sequence of phases incorporated in the Soft-Start;
- By-Pass contactor 24Vac in AC3;
- Thermal relay for motor overload protection with adjustable scale internally restorable;
- Auxiliary circuits protection fuses;
- Motor protection fuses;
- Main switch with door interlock;
- Metallic box;
- Protection IP55;
- Ambient temperature: -5/+40 °C;
- Relative humidity 50% at 40 °C (not condensed).

