High quality, full stainless steel 5”, 6” and 8” borehole pumps.
Cost-effective and efficient pumping equipment tested to the highest industry standards. Innovative design engineered for maximum serviceability and exceptional efficiency.
Key features:
- Available in 304 or 316 stainless steel.
- Fluted NBR bearings and PTFE wear rings between the impeller and housing eliminate a common source of wear.
- Floating PTFE neck rings prevent the entry of solids giving excellent abrasives handling and wear resistance.
- To eliminate water-hammer stresses to the pump impellers and diffusers, the check valve assembly is incorporated into the discharge head which is supported directly by the pump casing.
Flow capacity up to 110 m3/h, pressures up to 45 Bar (450 m)
Submersible Pumps
Stainless Steel Close-Coupled Well Pumps for 6" wells and larger. Three
models available for 50 Hz or 60 Hz supply ( 'In-line' version available )
Applications
| - Water Abstraction |
- Dewatering |
| - Agriculture |
- Pressure Boosting |
| - Industrial |
- Fountains |
Stainless Steel Submersible Centrifugal Pumps for 6" wells and larger.
Five models available for 50 Hz or 60 Hz supply - capable of flows 6 to
72 m3/h, heads to 49 bar.
Applications
| - Water Abstraction |
- Geothermal |
| - Agriculture |
- Dewatering |
| - Industrial |
- Pressure Boosting |
Stainless Steel Submersible Turbine Pumps for 8" wells and larger. Two
models available for 50 Hz or 60 Hz supply - capable of flows 40 to 120
m3/h, heads to 50 bar.
Applications
| - Water Abstraction |
- Geothermal |
| - Agriculture |
- Dewatering |
| - Industrial |
- Pressure Boosting |